We absolutely love this!!!! Yes, it shows sections sliding into each other so easily ok mine did slide into each other with one little thing. it will definitely make you swear. some tips if you run into trouble with the side. remove the back rest and i also removed the screws from the seat cushion get it out of the way then slide the side on correctly. next replace the back be gentle its made of something other than wood You will find the back side where the bolts go is Velcro held material. but gently pull to view holes. if you drive the socket head to far in and it the bolt pulls through easy fix get a washer that fits around the bolt but make sure its wider than the hole soo place the washer over the bolt thus covering the entry hole and tighten enougr to keep it in place. next do the next bolt the same way. 2 bolts or socket screws hold the back in place now tighten both securing the back and side now if you removed the screws holding the seat return the screws. NOW when returning the screws, you look down you think if small enough person Umm i can get in there and it would be so much easier DONT ITS NOT WOOD AND WONT HOLD THE WEIGHT SO DO THE SIDE BRACKET. YOU ONLY NEEDED TO REMOVE ONE1 Reattach but before doing so make Sure the hinges are on the inside now after attaching the side hinge reset the hinge screws. the. The whole process will take about 35 - 40 min and will be so secure, especially the side and back. if everything just slides into place, hurry for you, if it isnt all the things are ready, just follow along. When assembled it does look nice. just think have you ever bought a unit that was made in China that the directions and assembly went oh so smooth now you have the answers
worth the money
We absolutely love this!!!! Yes, it shows sections sliding into each other so easily ok mine did slide into each other with one little thing. it will definitely make you swear. some tips if you run into trouble with the side. remove the back rest and i also removed the screws from the seat cushion get it out of the way then slide the side on correctly. next replace the back be gentle its made of something other than wood You will find the back side where the bolts go is Velcro held material. but gently pull to view holes. if you drive the socket head to far in and it the bolt pulls through easy fix get a washer that fits around the bolt but make sure its wider than the hole soo place the washer over the bolt thus covering the entry hole and tighten enougr to keep it in place. next do the next bolt the same way. 2 bolts or socket screws hold the back in place now tighten both securing the back and side now if you removed the screws holding the seat return the screws. NOW when returning the screws, you look down you think if small enough person Umm i can get in there and it would be so much easier DONT ITS NOT WOOD AND WONT HOLD THE WEIGHT SO DO THE SIDE BRACKET. YOU ONLY NEEDED TO REMOVE ONE1 Reattach but before doing so make Sure the hinges are on the inside now after attaching the side hinge reset the hinge screws. the. The whole process will take about 35 - 40 min and will be so secure, especially the side and back. if everything just slides into place, hurry for you, if it isnt all the things are ready, just follow along. When assembled it does look nice. just think have you ever bought a unit that was made in China that the directions and assembly went oh so smooth now you have the answers