if you do like meagan says and screw the screws into the plastic and also screw the metal circle things in. its super sturdy. the instructions dont have words so its easy to miss those steps but do that and its great
Its lower than I thought it was but its nice looking. Set up took forever. The box is filled with a million and one pieces. Not necessarily hard to set up but tedious
The box for this came pretty beat tf up.
Moving it by yourself is not advised.
BUT, after watching the video for assembly, and checking the directions back and forth a lot.
This does make a nice setup.
Thats cool. This TV cabinet surprised me! The installation is very convenient. My friend and I assembled it in 2 hours. The quality of TV cabinet is quite better and cheaper than similar products of other brands. This board has a certain toughness and can fully withstand my 55In TV. Because its structure is relatively simple, the connecting part is very important. The TV cabinet will be stronger only after the connectors are installed. In fact, the light is really the finishing touch of the cabinet. I like this design very much. The most important thing is that the lamp can be directly adhered to the TV cabinet. Besides, I can easily replace other LED lamps. In the future, I will invite my friends to my house to watch a football match. Turn on the lights and create more atmosphere!
For the price, this is a very nice piece. As others indicate, the assembly instructions are crap. It only took me a little over an hour to assemble by myself; aligning the doors took some fine/tuning.
Here are some tips; the only tools required are a Phillips/head screwdriver and a rubber mallet.
1) Inspect and count all pieces before starting; on the box, it states that returns must be in the same box, so make sure you want to keep it and do not destroy the box while opening it.
2) Assemble in an open area, protecting both the boards and your floors with a dropcloth or old sheet.
3) Knock or blow out any particle board debris that is lodged inside the seats for the cam locks; they will not sit properly otherwise.
4) The first step is to insert the cam bolts and dowels. The bolts need to be screwed in; doing so opens the flange (the ones on my unit are orange) to secure the bolt to the board. After inserting the dowels, tamp them down gently. OPTIONAL: add a small amount of wood glue to the end of each before inserting.
Following steps 3 and 4 should ensure that the pieces fit together as intended, with no gaps.
5) When attaching the doors, I recommend attaching the hinges to the cabinet first (use the oval/shaped holes) and then to the doors. You can firmly screw the hinges on, as they have an adjusting screw for alignment. Best to align the doors once the unit is placed where you want it.
Be patient and try to avoid knicking the boards with tools; it is particleboard after all and is easily damaged.
The one I received had a small amount of damage/knicks, but I am just going to use a cabinet pen for those.
Also, the only glossy parts are the doors, which is fine with me, as I am putting it next to Billy bookshelves, which have a matte finish.
The stand is really good for the most part. Love a lot about the look and it holds my 58 well. My only con is that my LED lights only worked once, when I first hooked it up and no longer is turning on. Not sure if I just got a bad battery or something.
Reviews
Nice Shiny
Very small. Pictures is misleading unfortunately.
great!
if you do like meagan says and screw the screws into the plastic and also screw the metal circle things in. its super sturdy. the instructions dont have words so its easy to miss those steps but do that and its great
100000 different pieces
Its lower than I thought it was but its nice looking. Set up took forever. The box is filled with a million and one pieces. Not necessarily hard to set up but tedious
Cute
Its cute and exactly like the photos my only complaint is i struggled putting it together .
Its Aight.
The box for this came pretty beat tf up. Moving it by yourself is not advised. BUT, after watching the video for assembly, and checking the directions back and forth a lot. This does make a nice setup.
Thats cool！
Thats cool. This TV cabinet surprised me! The installation is very convenient. My friend and I assembled it in 2 hours. The quality of TV cabinet is quite better and cheaper than similar products of other brands. This board has a certain toughness and can fully withstand my 55In TV. Because its structure is relatively simple, the connecting part is very important. The TV cabinet will be stronger only after the connectors are installed. In fact, the light is really the finishing touch of the cabinet. I like this design very much. The most important thing is that the lamp can be directly adhered to the TV cabinet. Besides, I can easily replace other LED lamps. In the future, I will invite my friends to my house to watch a football match. Turn on the lights and create more atmosphere!
I loved it, perfect for where I wanted it
Super easy to assemble.nice product
Pretty solid for price
For the price, this is a very nice piece. As others indicate, the assembly instructions are crap. It only took me a little over an hour to assemble by myself; aligning the doors took some fine/tuning. Here are some tips; the only tools required are a Phillips/head screwdriver and a rubber mallet. 1) Inspect and count all pieces before starting; on the box, it states that returns must be in the same box, so make sure you want to keep it and do not destroy the box while opening it. 2) Assemble in an open area, protecting both the boards and your floors with a dropcloth or old sheet. 3) Knock or blow out any particle board debris that is lodged inside the seats for the cam locks; they will not sit properly otherwise. 4) The first step is to insert the cam bolts and dowels. The bolts need to be screwed in; doing so opens the flange (the ones on my unit are orange) to secure the bolt to the board. After inserting the dowels, tamp them down gently. OPTIONAL: add a small amount of wood glue to the end of each before inserting. Following steps 3 and 4 should ensure that the pieces fit together as intended, with no gaps. 5) When attaching the doors, I recommend attaching the hinges to the cabinet first (use the oval/shaped holes) and then to the doors. You can firmly screw the hinges on, as they have an adjusting screw for alignment. Best to align the doors once the unit is placed where you want it. Be patient and try to avoid knicking the boards with tools; it is particleboard after all and is easily damaged. The one I received had a small amount of damage/knicks, but I am just going to use a cabinet pen for those. Also, the only glossy parts are the doors, which is fine with me, as I am putting it next to Billy bookshelves, which have a matte finish.
Hard to assemble, but well worth the hassle
Took a couple hours to assemble it but it looks aming. Even a 65 tv looks great on it
Recommended
The stand is really good for the most part. Love a lot about the look and it holds my 58 well. My only con is that my LED lights only worked once, when I first hooked it up and no longer is turning on. Not sure if I just got a bad battery or something.
Add a review