Like the look fabric on head, side, and foot boards. The shorter headboard looks better than tall ones in our bedroom. Arrived in perfect condition even though one end of the box was torn open. Relatively easy assembly even though the instructions have mistakes and dont provide details. Is pretty solid when assembled. The s with hook loop hold/down is handy after understanding how to install them. When we tried placing a new king size memory foam mattress on it, the frame dimensions were less than then the mattress. Being foam, we tucked the sides and ends of the mattress into the frame edges. Makes sheet installation a little more difficult, not severe. Since dimensions of foam mattresses varies, and framed ones usually dont, I suspect the bed frame would work OK for framed mattresses.
Nice sturdy bed frame. Was relatively easy to put together by following the instructions. Probably took about 1.5 hours. All hardware fit perfect. Headboard is a little short if a box spring is used under a 12 mattress. The only problem was the box was badly damaged but the only damage to the bed was a small smudge to the headboard but it was easy to clean without any permanent marks.
The bed is fine, but I ordered gray and received linen. We didnt realize it until it was together and so Im keeping it, but I had to return all the linens since they were bought to match a gray bed, not a one. Disappointing.
Love the look of headboard and frame. It went together with no issues with one step of their instructions being wrong but easily figured out. Great looking frame and head board that was very sturdy and solid. But one major issue.
When reading the reviews we saw many users said it was too big for their . So we measure our mattress and looked at the product description and their description is wrong they show that a full size width is 60 its not, it is only 56 wide. that doesnt fit or mattress. Had to return it. A shame because I really liked it.
They state the following:
Get it Right the First Time
It is also a good idea to check the size and the height of your mattress to make sure you are ordering the correct size. Keep in mind that you should combine the height of the frame, foundation (if you are adding one), and the mattress to get a gauge of the how tall your bed will be. Also note, because of the solid construction of this platform bed, it is recommended that two people lift and assemble the bed. Total weight should not exceed 700 lbs. including the mattress.
Full Size / 60 W x 84 L x 40 H x 88 lbs
The bed is great / weve been using it for a couple months now. The shipping box was big / but undamaged when it was delivered and so we thought it would be fine to assemble. During assembly, we noticed that one of the sides (on the side under the mattress) was ripped. Its pointed towards a corner in our room (and we were nearly done by the time we noticed it) and so we just left it as it was and finished the assembly. Be sure to check all the upholstery on yours prior to starting assembly!
This bed was delivered mostly intact, except some of the pieces that need to be screwed in came bent. We had to re/shape them with pliers, which sucked. Since they came bent, there was also a tear in the headboard zippered compartment and the hole will only get bigger with time. These are easy packaging fixes that Im disappointed the manufacturer overlooked. Lastly, the footboard is not sturdy at all. My boyfriend is 180 pounds, but when he steps up to get on the bed, we can hear the wood crunching. I dont feel safe stepping on the footboard to boost myself up, which sucks because its a normal thing you do with a sturdy bed frame. Overall, I wouldnt really recommend this if youre looking for a sturdy, well/built bed. If youre on a budget, go for it. But just know there are imperfections.
What was bad:
When we finally got it put together, the bed frame was not big enough for our king/size bed. We had purchased a Nectar king/size bed, measuring at 80 inches by 76 inches by 11 inches. From the pictures above, you can see that the bed frame was about 5 inches longer (on each side of the bed), and was shorter in length than the bed itself. So we slept with the bottom of our bed slightly inclined because it did not fit the frame. (Yes, we tried flipping it the other way. Yes, we felt stupid after we did.)
What was good:
/ Easy/ish to put together. Took two of us about an hour to do so. We would recommend removing the wooden holders from the side frames before you put it all together. When we got to the final middle bar support beam, it took forever to get the screws in because of those holders were right in the way. Using the allen wrench they provided was very awkward and not easy to get a good grip.
/ Everything was easily stored in the headboard and was easily removed.
/ The actual tufted headboard seems to be fairly nice.
Recommendation:
Had we known that the bed would not fit the frame before we put it all together, we would have sent it back. Because of the size discrepancies, it doesnt look very aesthetically pleasing. However, after we put all the work into it, we decided to at least give it at try. All in all, its worth a shot. But please, please, please be sure that your bed will fit the frame before you buy it. It is disheartening to put all that work in and your bed end up not fitting.
Positives:
1. The bed is built well and very sturdy. Much sturdier than our bed from Overstock.
2. The bed was packaged well to minimize excess packaging materials.
3. Quality is good. You cant tell that it is a 2XX bed
Cons:
1. Two screws were missing but we made it work still.
2. The color is NOT off as listed. It is more of a tan beige. Quite disappointing but its for the guest bedroom so were not going to be too picky or return it. The bed appears a different color on the photos vs in real life.
Reviews
King platform bed
Exactly as described, Very nice for the price and not difficult to put together.
Decent Quality Looks Good
Like the look fabric on head, side, and foot boards. The shorter headboard looks better than tall ones in our bedroom. Arrived in perfect condition even though one end of the box was torn open. Relatively easy assembly even though the instructions have mistakes and dont provide details. Is pretty solid when assembled. The s with hook loop hold/down is handy after understanding how to install them. When we tried placing a new king size memory foam mattress on it, the frame dimensions were less than then the mattress. Being foam, we tucked the sides and ends of the mattress into the frame edges. Makes sheet installation a little more difficult, not severe. Since dimensions of foam mattresses varies, and framed ones usually dont, I suspect the bed frame would work OK for framed mattresses.
Looks great!!
Nice sturdy bed frame. Was relatively easy to put together by following the instructions. Probably took about 1.5 hours. All hardware fit perfect. Headboard is a little short if a box spring is used under a 12 mattress. The only problem was the box was badly damaged but the only damage to the bed was a small smudge to the headboard but it was easy to clean without any permanent marks.
Received the wrong color bed
The bed is fine, but I ordered gray and received linen. We didnt realize it until it was together and so Im keeping it, but I had to return all the linens since they were bought to match a gray bed, not a one. Disappointing.
Love the look and feelbut it was not the right size.
Love the look of headboard and frame. It went together with no issues with one step of their instructions being wrong but easily figured out. Great looking frame and head board that was very sturdy and solid. But one major issue. When reading the reviews we saw many users said it was too big for their . So we measure our mattress and looked at the product description and their description is wrong they show that a full size width is 60 its not, it is only 56 wide. that doesnt fit or mattress. Had to return it. A shame because I really liked it. They state the following: Get it Right the First Time It is also a good idea to check the size and the height of your mattress to make sure you are ordering the correct size. Keep in mind that you should combine the height of the frame, foundation (if you are adding one), and the mattress to get a gauge of the how tall your bed will be. Also note, because of the solid construction of this platform bed, it is recommended that two people lift and assemble the bed. Total weight should not exceed 700 lbs. including the mattress. Full Size / 60 W x 84 L x 40 H x 88 lbs
Easy to build.
Easy to build. You dont need any extra tools aside from what they include.
Nice bed, check parts before assembling
The bed is great / weve been using it for a couple months now. The shipping box was big / but undamaged when it was delivered and so we thought it would be fine to assemble. During assembly, we noticed that one of the sides (on the side under the mattress) was ripped. Its pointed towards a corner in our room (and we were nearly done by the time we noticed it) and so we just left it as it was and finished the assembly. Be sure to check all the upholstery on yours prior to starting assembly!
Not very sturdy and pieces were damaged
This bed was delivered mostly intact, except some of the pieces that need to be screwed in came bent. We had to re/shape them with pliers, which sucked. Since they came bent, there was also a tear in the headboard zippered compartment and the hole will only get bigger with time. These are easy packaging fixes that Im disappointed the manufacturer overlooked. Lastly, the footboard is not sturdy at all. My boyfriend is 180 pounds, but when he steps up to get on the bed, we can hear the wood crunching. I dont feel safe stepping on the footboard to boost myself up, which sucks because its a normal thing you do with a sturdy bed frame. Overall, I wouldnt really recommend this if youre looking for a sturdy, well/built bed. If youre on a budget, go for it. But just know there are imperfections.
Nice frame, if your bed fits
What was bad: When we finally got it put together, the bed frame was not big enough for our king/size bed. We had purchased a Nectar king/size bed, measuring at 80 inches by 76 inches by 11 inches. From the pictures above, you can see that the bed frame was about 5 inches longer (on each side of the bed), and was shorter in length than the bed itself. So we slept with the bottom of our bed slightly inclined because it did not fit the frame. (Yes, we tried flipping it the other way. Yes, we felt stupid after we did.) What was good: / Easy/ish to put together. Took two of us about an hour to do so. We would recommend removing the wooden holders from the side frames before you put it all together. When we got to the final middle bar support beam, it took forever to get the screws in because of those holders were right in the way. Using the allen wrench they provided was very awkward and not easy to get a good grip. / Everything was easily stored in the headboard and was easily removed. / The actual tufted headboard seems to be fairly nice. Recommendation: Had we known that the bed would not fit the frame before we put it all together, we would have sent it back. Because of the size discrepancies, it doesnt look very aesthetically pleasing. However, after we put all the work into it, we decided to at least give it at try. All in all, its worth a shot. But please, please, please be sure that your bed will fit the frame before you buy it. It is disheartening to put all that work in and your bed end up not fitting.
Overall a good bed (minus color)
Positives: 1. The bed is built well and very sturdy. Much sturdier than our bed from Overstock. 2. The bed was packaged well to minimize excess packaging materials. 3. Quality is good. You cant tell that it is a 2XX bed Cons: 1. Two screws were missing but we made it work still. 2. The color is NOT off as listed. It is more of a tan beige. Quite disappointing but its for the guest bedroom so were not going to be too picky or return it. The bed appears a different color on the photos vs in real life.
Add a review