The wood are broken in assembly you cant secure it tied because its weak, it makes a lot of noise if I have choice I would have returned it the quality its bad for a twin bed for young kids
The bunkbed was quite easy to assemble. I wish I would had bought it last year instead of the metal one Id purchased. I was able to put it together myself, aside from help for lifting the top bed and placing it, in about 5 hours, with interruptions by kids, misplacing screws, and not paying attention and mixing up parts. My advice is to place the separate screws in small ziplock bags labeled correctly as it only comes with a tiny piece of paper to label each type of screw. If everything is lined up right and the right screw is used, you can almost use just your hands for a vast amount of the assembly. The only downside is that the bed is slightly longer than the twin mattresses I have for it.
My kids love this bed! Only thing I would change is to have a few more wooden slacks for more mattress support but overall its super sturdy and great quality. Wasnt too hard for my husband to put together either.
This bed was great. My son loves it and it was easy to put together. I put it together by myself (which I dont recommend if it can be avoided) but even then it was relatively easy and could have been knocked out exponentially quicker with another person.
My first impression: the packaging was fantastic, all of the pieces were all well labeled.
The edges and surface finish are top notch, wood itself is pretty damn good.
I did the installation on my own and I was taking my sweet time, it took me over 2 hours. I assembled a mail order swing set before, by comparison this is pretty easy and straight forward. Power tool, 5/32 hex head, and 2 Philips head are all you need.
Some of the pilot holes were not perfectly aligned, so that took some elbow grease and patience to get the boards line up and fasteners to start. My only complaint was, the manufacturer could have make the main frame boards/rails which tie the front/aft headboard to be symmetrical instead of asymmetrical. The instruction had a little mix up and I failed to recognize 1 frame leg and 1 main rail has to be reserve for the ladder side. They could have make the boards symmetrical and be ambidextrous, just provide matching color plugs to plug the extra holes, I wouldnt even be mad. But by the time I got everything tighten up and tried install the ladder on the last step, then realized my mistake; I was pretty annoyed and I have to bust out the drill bit to match drill 2 bottom holes to tie down the ladder.
Last complaint is the upper bunk and the lower bed are only aligned by wooden dowels without any restraint, I foresee the boys being rough and rock and tilt the upper/lower halves without some real brackets to tie them together.
Overall, it is a decent project/product
For the price point this bunk bed is an excellent buy. Its just good enough in every area. Its sturdy enough, its good looking enough and the instructions are good enough. Nothing is outstanding about this bed. The finish is good and while there were a few very minor scrapes I would consider the quality control to be very good. There were no missing parts and thankfully no missing hardware. My grandsons love it and we are overall very happy with the purchase. For just under 300 I recommend this bed. Dont expect high end, think more solid and functional.
It took about about 6.5 hours to put the bed together.
Reviews
Its a poor quality
The wood are broken in assembly you cant secure it tied because its weak, it makes a lot of noise if I have choice I would have returned it the quality its bad for a twin bed for young kids
Great bunk bed
Love this bunk bed set. I put together myself and Im not very handy at all, but the instructions were clear. Very sturdy.
Very Sturdy, easy to assemble.
The bunkbed was quite easy to assemble. I wish I would had bought it last year instead of the metal one Id purchased. I was able to put it together myself, aside from help for lifting the top bed and placing it, in about 5 hours, with interruptions by kids, misplacing screws, and not paying attention and mixing up parts. My advice is to place the separate screws in small ziplock bags labeled correctly as it only comes with a tiny piece of paper to label each type of screw. If everything is lined up right and the right screw is used, you can almost use just your hands for a vast amount of the assembly. The only downside is that the bed is slightly longer than the twin mattresses I have for it.
Aming bunk bed
Its aming strong bed
AmIng looking and sized bed frames
My only reservation is that when more weight is applied. The wood frame may need to be replaced at some point with something sturdier
Perfect!
My kids love this bed! Only thing I would change is to have a few more wooden slacks for more mattress support but overall its super sturdy and great quality. Wasnt too hard for my husband to put together either.
Good quality bunk bed! 5 stars
It had 22 steps for completing it. Pretty easy to follow and the wood is good quality and sturdy. Id def buy again if I had to!
Very pleased
This bed was great. My son loves it and it was easy to put together. I put it together by myself (which I dont recommend if it can be avoided) but even then it was relatively easy and could have been knocked out exponentially quicker with another person.
Great smooth finish, good fits, have room for improvement
My first impression: the packaging was fantastic, all of the pieces were all well labeled. The edges and surface finish are top notch, wood itself is pretty damn good. I did the installation on my own and I was taking my sweet time, it took me over 2 hours. I assembled a mail order swing set before, by comparison this is pretty easy and straight forward. Power tool, 5/32 hex head, and 2 Philips head are all you need. Some of the pilot holes were not perfectly aligned, so that took some elbow grease and patience to get the boards line up and fasteners to start. My only complaint was, the manufacturer could have make the main frame boards/rails which tie the front/aft headboard to be symmetrical instead of asymmetrical. The instruction had a little mix up and I failed to recognize 1 frame leg and 1 main rail has to be reserve for the ladder side. They could have make the boards symmetrical and be ambidextrous, just provide matching color plugs to plug the extra holes, I wouldnt even be mad. But by the time I got everything tighten up and tried install the ladder on the last step, then realized my mistake; I was pretty annoyed and I have to bust out the drill bit to match drill 2 bottom holes to tie down the ladder. Last complaint is the upper bunk and the lower bed are only aligned by wooden dowels without any restraint, I foresee the boys being rough and rock and tilt the upper/lower halves without some real brackets to tie them together. Overall, it is a decent project/product
Good for the price point
For the price point this bunk bed is an excellent buy. Its just good enough in every area. Its sturdy enough, its good looking enough and the instructions are good enough. Nothing is outstanding about this bed. The finish is good and while there were a few very minor scrapes I would consider the quality control to be very good. There were no missing parts and thankfully no missing hardware. My grandsons love it and we are overall very happy with the purchase. For just under 300 I recommend this bed. Dont expect high end, think more solid and functional. It took about about 6.5 hours to put the bed together.
Add a review