The outfit was nice and it fit well except that it did not cover my boobs properly. I wear a size 34 C and they were sticking out and that made it look a bit shabby. I guess if I were a size smaller there would have been no problems
So I had the same problem as a lot of people with the middle bar for the main support located at the head rest (part B that connects 1 and 2) being too short. The holes were misaligned just enough to where I couldnt screw it in, and so I ordered a replacement part from and it came in several weeks after. Tried to connect it and now the screw hole itself isnt aligned properly so I cant get the screw in all the way, but its in partially at an angle. So technically the bed frame is together and so far its fine. Im just OCD so it bothers me that the screw is messed up.
Theres a lot of space underneath and I havent had any problems with it being loud, but I also bought the 12 memory foam mattress from which I actually love a lot so that might be why.
In the end its still a decent frame for the price, but I mainly bought this cause I wanted to save money so I wont be buying frames from this manufacturer again. Mattresses however maybe. You get what you pay for.
UPDATE:
They sent me more pieces and it still didnt fit. So I reassembled the headboard in a different order with the middle piece first and it fit really snug so everything fits much better now. Therefore Im changing it from 3 to 4 stars.
Modern design. Easy to put together w/in 90min, and it comes with the tools to assemble it. It holds the mattress in place well, I was concerned that with no headboard the mattress would slide forward if you use the wall behind it to support your back sitting up, but it doesnt, at least for a memory foam mattress. There are 2 strips of adhesive on the wooden slats that I havent used to help hold it in place. I was also concerned with it making a lot of creeks and cranking sounds if you move around on top, but its fairly silent.
This is one of the easiest beds Ive ever put together! I laid every piece out on the floor mimicking where it would be if it was already put together. This guaranteed I had every piece and made putting it together a snap. You literally just match up the numbers on the pieces and screw together. Actual assembly took about 30/45 minutes by myself. Super sturdy too.
Its nothing fancy but this bed frame has held up. The slats are solid wood and hold in place with Velcro. I was a little suspect at first but six months later its held up. My only complaint is that theres no lip to keep my mattress from easily sliding around. I dont have issues with it sliding unless Im pushing it though so I wouldnt worry about the mattress going all over the place all the time. I just like to keep it lined up with the edges which is harder with nothing holding it in place. Overall Im very happy with this purchase!
I just got this bed delivered today. Thanks to previous posters I assembled it right the first time.
I got the twin size. When looking at the pictures I thought this one probably had 3 pieces lengthwise with one in the center, but I wasnt sure. It turns out the twin size only has the outer frame and not a middle piece. I tested the strength of this bed by standing on it in the middle and I didnt even hear a creak. All parts of the bed seem very sturdy. It passes the test for a 180/pound guy.
I was surprised to see double/sided tape on a couple of the slats, to keep the mattress in place. I thought that was amusing. Its a good idea to have something to hold the mattress in place on the bed but thats not a permanent solution. That didnt get in the way of anything, though. I peeled off the backing and stuck my mattress to it. Ill figure out a way to do that part of it better.
Solid, well worth the price, is what I say after receiving it and assembling it. Ill update in the future if theres a problem.
Got this delivered at work today and took it home. Set up was easy and it felt very sturdy once all the bolts were in. My new 10 inch foam mattress should arrive soon, and then I can give a better review of how well it works. Not really getting 14 inches of clearance under the bed, which is where I plan to store some thin items that are cluttering my closet.
I tried sleeping on the frame after covering it with some self inflating mattress pads and a couple of blankets. Not the worst night sleep, but I do hope the velcro noise stops once I put the mattress on. Hoping it will distribute my weight so the wood slats dont sag and cause that ripping noise you get when separating velcro. In case you didnt know, there are velcro strips down the long rails that attach to the wooden slats. There are two sets of 5 slats that are bound together with velcro material that mate up with the strips on the rails. They are meant to keep the slats in place, which is a good idea. There are also two slats with two sided tape that might also keep the slats from moving. Ill have to reread the instructions on where they should be installed. Right now they are at the head and the foot of the bed, but perhaps they should be near the center where more of the weight of my body is concentrated.
It was pretty funny when the cat jumped up to sleep with me. When I turned over and the slats depressed, the noise from the velcro ripping apart startled her. She thought something was creeping up on us.
Reviews
The outfit was nice and it fit well except that it did not
The outfit was nice and it fit well except that it did not cover my boobs properly. I wear a size 34 C and they were sticking out and that made it look a bit shabby. I guess if I were a size smaller there would have been no problems
Total bummer.
Low quality. Within a few months its started to buckle. I tightened the screws, but it didnt help. Very poorly made.
Honest review after a month or so
So I had the same problem as a lot of people with the middle bar for the main support located at the head rest (part B that connects 1 and 2) being too short. The holes were misaligned just enough to where I couldnt screw it in, and so I ordered a replacement part from and it came in several weeks after. Tried to connect it and now the screw hole itself isnt aligned properly so I cant get the screw in all the way, but its in partially at an angle. So technically the bed frame is together and so far its fine. Im just OCD so it bothers me that the screw is messed up. Theres a lot of space underneath and I havent had any problems with it being loud, but I also bought the 12 memory foam mattress from which I actually love a lot so that might be why. In the end its still a decent frame for the price, but I mainly bought this cause I wanted to save money so I wont be buying frames from this manufacturer again. Mattresses however maybe. You get what you pay for. UPDATE: They sent me more pieces and it still didnt fit. So I reassembled the headboard in a different order with the middle piece first and it fit really snug so everything fits much better now. Therefore Im changing it from 3 to 4 stars.
Very modern, great buy
Modern design. Easy to put together w/in 90min, and it comes with the tools to assemble it. It holds the mattress in place well, I was concerned that with no headboard the mattress would slide forward if you use the wall behind it to support your back sitting up, but it doesnt, at least for a memory foam mattress. There are 2 strips of adhesive on the wooden slats that I havent used to help hold it in place. I was also concerned with it making a lot of creeks and cranking sounds if you move around on top, but its fairly silent.
So easy!
This is one of the easiest beds Ive ever put together! I laid every piece out on the floor mimicking where it would be if it was already put together. This guaranteed I had every piece and made putting it together a snap. You literally just match up the numbers on the pieces and screw together. Actual assembly took about 30/45 minutes by myself. Super sturdy too.
Good value bed frame
Its nothing fancy but this bed frame has held up. The slats are solid wood and hold in place with Velcro. I was a little suspect at first but six months later its held up. My only complaint is that theres no lip to keep my mattress from easily sliding around. I dont have issues with it sliding unless Im pushing it though so I wouldnt worry about the mattress going all over the place all the time. I just like to keep it lined up with the edges which is harder with nothing holding it in place. Overall Im very happy with this purchase!
Minimal. Chic. Budget = On point. Directions
Minimal. Chic. Budget = On point. Directions that say Easy as 1/2/3 of course will never be THAT simple, but I am stoked on this bed frame!
All parts of the bed seem very sturdy. It passes the test for a 180/pound guy
I just got this bed delivered today. Thanks to previous posters I assembled it right the first time. I got the twin size. When looking at the pictures I thought this one probably had 3 pieces lengthwise with one in the center, but I wasnt sure. It turns out the twin size only has the outer frame and not a middle piece. I tested the strength of this bed by standing on it in the middle and I didnt even hear a creak. All parts of the bed seem very sturdy. It passes the test for a 180/pound guy. I was surprised to see double/sided tape on a couple of the slats, to keep the mattress in place. I thought that was amusing. Its a good idea to have something to hold the mattress in place on the bed but thats not a permanent solution. That didnt get in the way of anything, though. I peeled off the backing and stuck my mattress to it. Ill figure out a way to do that part of it better. Solid, well worth the price, is what I say after receiving it and assembling it. Ill update in the future if theres a problem.
Its OK
Beautiful, but its makes a lot of noise when you having a special moment if you know what I mean.
Well made, but I hope it quiets down after the mattress is in place.
Got this delivered at work today and took it home. Set up was easy and it felt very sturdy once all the bolts were in. My new 10 inch foam mattress should arrive soon, and then I can give a better review of how well it works. Not really getting 14 inches of clearance under the bed, which is where I plan to store some thin items that are cluttering my closet. I tried sleeping on the frame after covering it with some self inflating mattress pads and a couple of blankets. Not the worst night sleep, but I do hope the velcro noise stops once I put the mattress on. Hoping it will distribute my weight so the wood slats dont sag and cause that ripping noise you get when separating velcro. In case you didnt know, there are velcro strips down the long rails that attach to the wooden slats. There are two sets of 5 slats that are bound together with velcro material that mate up with the strips on the rails. They are meant to keep the slats in place, which is a good idea. There are also two slats with two sided tape that might also keep the slats from moving. Ill have to reread the instructions on where they should be installed. Right now they are at the head and the foot of the bed, but perhaps they should be near the center where more of the weight of my body is concentrated. It was pretty funny when the cat jumped up to sleep with me. When I turned over and the slats depressed, the noise from the velcro ripping apart startled her. She thought something was creeping up on us.
Add a review