I give the instruction manual is a 9/10. If I wrote it it would have been 10/10. Waaaaay better than most manual.
There are extra assemble parts included. The parts are separately carded for the trundle and for the bed. The flat washers are not actually flat. They are curved so be sure when you install them that the curve matches the curve of the frame.
Some hints:
When doing the bed, leave all the bolts finger tight until you have installed the slat spacers THEN tighten the bolts.
Do a rough guess for the centering of the slat rings and slats. Go back and measure and figure the center and just tap them to whatever center you want. Mine was 20/3/8 from the outside. Takes less than 5 minutes.
After you have assembled the trundle perimeter finger tight, stand it up on the narrow end to install the slats and spacers to the midway point. Flip it over and do the other end. This way you are standing. As with the bed, install all the slat spacers and center them THEN lay it down on the floor THEN tighten the bolts.
When inserting the plastic locks for the slats, insert one end then push on the other end. They go in much easier. If you insert one end then press in the middle, it is more difficult and you will also break some of the locking tabs.
You could probably get away with a 9 mattress on the trundle.
On the bed, it is about 8 to the top of the curved hoops. If you go taller, it may look out of proportion.
I used a quart freezer bag and placed a metal grommet in the corner and placed all the extra parts and a card with the name and model and etc info and twist/tied it to the frame where it is hidden from view.
Great bed for the money. Sturdy and good looking. The lower frame rolls smoothly out from under and the three drawers are nice space savers that work well too. Yep, this is not a 10 minute assembly. Know ahead of time that youre looking at 3/4 hours. I knew that and put the time aside when the bed arrived. Left plenty of space and had good lighting and read the instructions. Its one of those things that if I did it again a second time a few days later, it would go much quicker. There is a learning curve, but most people will only assemble one of these. But its nice and sturdy and handsome looking. All the parts were there and they all went together as designed. No mix ups! Very happy with our purchase.
Gorgeous quality!
I purchased the ivory. It shows a bit more in the grey side not as yellow as I thought it was going to be. But nevertheless absolutely stunning!
Perfect big girl bed for transitioning my 3 year old out of her crib. Its really sturdy and well made, especially for the price point! The trundle underneath is perfect and will accommodate normal twin size mattresses, so no worries about finding a thin mattress to fit. We are so pleased with this purchase and highly recommend.
Terrible quality the wood sticks that hold the mattress didnt even last a week before they stared snapping the bottom bed just broke off the metal terrible quality!! So not happy at all with this bed .
Love this bed! We use it as a sofa, its that beautiful. Weve thrown a ton of pillows on it, its so comfy. It did take me a little under 4hours to build, but was very easy to follow. No regrets.
Reviews
Great bed, but beware of color.
Cute bed but color is swimming pool blue. Not the same color as picture on .
Great frame
I give the instruction manual is a 9/10. If I wrote it it would have been 10/10. Waaaaay better than most manual. There are extra assemble parts included. The parts are separately carded for the trundle and for the bed. The flat washers are not actually flat. They are curved so be sure when you install them that the curve matches the curve of the frame. Some hints: When doing the bed, leave all the bolts finger tight until you have installed the slat spacers THEN tighten the bolts. Do a rough guess for the centering of the slat rings and slats. Go back and measure and figure the center and just tap them to whatever center you want. Mine was 20/3/8 from the outside. Takes less than 5 minutes. After you have assembled the trundle perimeter finger tight, stand it up on the narrow end to install the slats and spacers to the midway point. Flip it over and do the other end. This way you are standing. As with the bed, install all the slat spacers and center them THEN lay it down on the floor THEN tighten the bolts. When inserting the plastic locks for the slats, insert one end then push on the other end. They go in much easier. If you insert one end then press in the middle, it is more difficult and you will also break some of the locking tabs. You could probably get away with a 9 mattress on the trundle. On the bed, it is about 8 to the top of the curved hoops. If you go taller, it may look out of proportion. I used a quart freezer bag and placed a metal grommet in the corner and placed all the extra parts and a card with the name and model and etc info and twist/tied it to the frame where it is hidden from view.
Good looking and solid.
Great bed for the money. Sturdy and good looking. The lower frame rolls smoothly out from under and the three drawers are nice space savers that work well too. Yep, this is not a 10 minute assembly. Know ahead of time that youre looking at 3/4 hours. I knew that and put the time aside when the bed arrived. Left plenty of space and had good lighting and read the instructions. Its one of those things that if I did it again a second time a few days later, it would go much quicker. There is a learning curve, but most people will only assemble one of these. But its nice and sturdy and handsome looking. All the parts were there and they all went together as designed. No mix ups! Very happy with our purchase.
Easy to put together
My daughter loves her bed . and so does her friends that dont have to sleep on her floor now lol
Aming Quality!
Gorgeous quality! I purchased the ivory. It shows a bit more in the grey side not as yellow as I thought it was going to be. But nevertheless absolutely stunning!
Color is a little more bluish than showed but ok
Nothing
Great Bed for Toddlers/Young Children
Perfect big girl bed for transitioning my 3 year old out of her crib. Its really sturdy and well made, especially for the price point! The trundle underneath is perfect and will accommodate normal twin size mattresses, so no worries about finding a thin mattress to fit. We are so pleased with this purchase and highly recommend.
Terrible bed
Terrible quality the wood sticks that hold the mattress didnt even last a week before they stared snapping the bottom bed just broke off the metal terrible quality!! So not happy at all with this bed .
Gorgeous, we love it!
Love this bed! We use it as a sofa, its that beautiful. Weve thrown a ton of pillows on it, its so comfy. It did take me a little under 4hours to build, but was very easy to follow. No regrets.
Loved it.
Great product our 5 year old son loves it! It is a twin size but somehow feels bigger. Recommend 100.
Add a review