The back support is perfect just as the area of supporting your hands is very comfortable. I dare to say that it is ideal for people who have back pain to be sitting in front of their doctor like me for a long time. It feels soft, the material from which it is made and does not produce heat even if you are sitting for a long time. You can adjust the height is perfect for the office, classroom and for your home
All of the parts to assemble this chair were triple/boxed and arrived in excellent condition. Using the included Allen wrench, I assembled this chair in less than an hour using the clear instructions and the carefully labeled blister packed bolts. Using an impact tool to tighten the bolts could have made the assembly go faster. I needed a hammer to gently tap the castors into their sockets on the base.
The base of this chair with roller castors has five arms that extend beyond the width and depth of the seat helping to ensure that leaning back or to the side wont cause the chair to tip over.
A lever extends to the right side of the chair to allow easy height adjustment. The tilt tension adjustment below the bottom of the seat either locks the seat in an upright position or can be adjusted to allow a degree of backward tilt.
I found good fit and finish with all of the parts. Both my wife and I found the seat and back to be quite comfortable with good lower back support. The arm rests are secure and sturdy enough to allow me to use them to help lift myself from the seat. The arm rests extend only half/way from the back of the chair allowing the front half of the chair to roll under a desk without banging them on the desk.
Overall, I found this to be an attractive, comfortable, serviceable computer/office desk chair.
This is a very comfortable chair for sitting at a desk for many hours even. It feels as high quality as another very expensive office chair that I have in my office. Its well padded, and the material feels quite sturdy and good quality. It easily supports a larger man (250). Best part though is that it was easy to put together, and Im not the least bit mechanically inclined. Im very happy with this desk chair.
Fully assembled, this office chair seems short for tall people (59+). I felt like this was too short (vertically) even though I knew this was a mid/back chair. It made me sit differently and I couldnt lean back comfortably without feeling like my shoulder blades were resting on top of the chairs back LOL.
The chair is really nicely padded, with faux leather that looks realistic. This is a deep black that can NOT be mistaken for a dark grey or brown. The PU Leather has the thickness of a faux leather couch thats soft but not firm enough not to puncture. I would be carefully resting any sharp objects on this chair as it will puncture or peel the leather.
The assemble was somewhat easy, although the wheels were a little tricky to push into the base. There was also one screw that didnt want to insert properly, it would slightly insert on an angle, so you need to do some light hammer/banging to get the screws (on the chair part) to cooperate. Its not difficult, just a little tricky to make everything fit in its place. The directions are helpful and clear, it took less than 30 minutes to fully assemble.
I probably wouldnt keep this chair for myself, since I dont think its for someone who is tall (especially not 6 feet tall) and would work better for someone more petite. Its not very wide so if youre bottom/heavy (or plus/size 14+) I would say this would be a very snugged fit. There really isnt a lot of wiggle room, the chairs bottom is short (from back to front) and so is the chairs back (from bottom to top). Again, this seems more for a short petite person that is more slender. I hope this helps
Pros:
1. The chair is very comfortable to sit in.
2. The wheels are very smooth.
3. The faux leather is very easy to clean.
4. Height adjustment is very simple.
5. You can choose how much you want this to lean back, if at all.
Cons:
1. The arm rests are quite narrow and thinly padded.
2. When dirty, its very noticeable on the faux leather.
3. The chair has just a hair of wobble to it. This is because the height adjustment simply sits inside a hole underneath the base of the chair. This is a very common way chairs like this are done, but I wish it wasnt the case.
Overall, this is quite a nice chair, even with the minor issues.
Recommended
4 stars
Cheers!
Reviews
Very comfortable and with good design
The back support is perfect just as the area of supporting your hands is very comfortable. I dare to say that it is ideal for people who have back pain to be sitting in front of their doctor like me for a long time. It feels soft, the material from which it is made and does not produce heat even if you are sitting for a long time. You can adjust the height is perfect for the office, classroom and for your home
Stable and Comfortable
All of the parts to assemble this chair were triple/boxed and arrived in excellent condition. Using the included Allen wrench, I assembled this chair in less than an hour using the clear instructions and the carefully labeled blister packed bolts. Using an impact tool to tighten the bolts could have made the assembly go faster. I needed a hammer to gently tap the castors into their sockets on the base. The base of this chair with roller castors has five arms that extend beyond the width and depth of the seat helping to ensure that leaning back or to the side wont cause the chair to tip over. A lever extends to the right side of the chair to allow easy height adjustment. The tilt tension adjustment below the bottom of the seat either locks the seat in an upright position or can be adjusted to allow a degree of backward tilt. I found good fit and finish with all of the parts. Both my wife and I found the seat and back to be quite comfortable with good lower back support. The arm rests are secure and sturdy enough to allow me to use them to help lift myself from the seat. The arm rests extend only half/way from the back of the chair allowing the front half of the chair to roll under a desk without banging them on the desk. Overall, I found this to be an attractive, comfortable, serviceable computer/office desk chair.
Very comfortable, sturdy chair
This is a very comfortable chair for sitting at a desk for many hours even. It feels as high quality as another very expensive office chair that I have in my office. Its well padded, and the material feels quite sturdy and good quality. It easily supports a larger man (250). Best part though is that it was easy to put together, and Im not the least bit mechanically inclined. Im very happy with this desk chair.
Small Width . Not the most comfortable ?
Fully assembled, this office chair seems short for tall people (59+). I felt like this was too short (vertically) even though I knew this was a mid/back chair. It made me sit differently and I couldnt lean back comfortably without feeling like my shoulder blades were resting on top of the chairs back LOL. The chair is really nicely padded, with faux leather that looks realistic. This is a deep black that can NOT be mistaken for a dark grey or brown. The PU Leather has the thickness of a faux leather couch thats soft but not firm enough not to puncture. I would be carefully resting any sharp objects on this chair as it will puncture or peel the leather. The assemble was somewhat easy, although the wheels were a little tricky to push into the base. There was also one screw that didnt want to insert properly, it would slightly insert on an angle, so you need to do some light hammer/banging to get the screws (on the chair part) to cooperate. Its not difficult, just a little tricky to make everything fit in its place. The directions are helpful and clear, it took less than 30 minutes to fully assemble. I probably wouldnt keep this chair for myself, since I dont think its for someone who is tall (especially not 6 feet tall) and would work better for someone more petite. Its not very wide so if youre bottom/heavy (or plus/size 14+) I would say this would be a very snugged fit. There really isnt a lot of wiggle room, the chairs bottom is short (from back to front) and so is the chairs back (from bottom to top). Again, this seems more for a short petite person that is more slender. I hope this helps
Very comfortable, standard height desk chair.
Pros: 1. The chair is very comfortable to sit in. 2. The wheels are very smooth. 3. The faux leather is very easy to clean. 4. Height adjustment is very simple. 5. You can choose how much you want this to lean back, if at all. Cons: 1. The arm rests are quite narrow and thinly padded. 2. When dirty, its very noticeable on the faux leather. 3. The chair has just a hair of wobble to it. This is because the height adjustment simply sits inside a hole underneath the base of the chair. This is a very common way chairs like this are done, but I wish it wasnt the case. Overall, this is quite a nice chair, even with the minor issues. Recommended 4 stars Cheers!
Add a review